M755LMR Mainboard User’s Manual
12
Jumper JP2: Wake On LAN Selector
This controls the LAN Wake Up feature where the system will
wake up in response to a signal over a LAN it is connected to.
Note:
The system must provide 1A on the +5VSB (+5V Standby)
signal in order for this feature to work.
Function Jumper
Setting
Disable Short
Pins
1-2
Enable Short
Pins
2-3
Jumper JP3: Clear CMOS Memory
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the mainboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function Jumper
Setting
Clear CMOS Memory
Short Pins 1-2
Normal Operation
Short Pins 2-3
