manualshive.com logo in svg

PC Chips A33G Series, User Manual, Page: 33 / 33

Share
Download
PC Chips A33G Series User Manual Download Page 33

30

Motherboard User’s Guide

3

The support software will automatically install.

Once any of the installation procedures start, software is automatically installed in
sequence. You need to follow the onscreen instructions, confirm commands and
allow the computer to restart as few times as needed to complete installing what-
ever software you selected. When the process is finished, all the support software
will be installed and start working.

Bundled Software Installation

All bundled software available on the CD-ROM is for users’ convenience. You can
install bundled software as follows:

1

Click the 

Application 

button while the Auto Setup screen pops out

after inserting the support CD-ROM.

2

A software menu appears. Click the software you want to install.

3

Follow onscreen instructions to install the software program step by

step until finished.

AMI/AWARD Flash Utility

This utility lets you erase the system BIOS stored on a Flash Memory chip on the
motherboard, and lets you copy an updated version of the BIOS to the chip.
Proceed with caution when using this program. If you erase the current BIOS and
fail to write a new BIOS, or write a new BIOS that is incorrect, your system will
malfunction. Refer to Chapter 3, Using BIOS for more information.

WinFlash Utility

The WinFlash utility is a Windows version of the DOS BIOS flash writer utility.
The utility enables you to flash the system BIOS stored on a Flash Memory chip
on the motherboard while in a Windows environment. This utility is currently
available for WINXP\2000. To install the WinFlash utility, run AFUWIN.EXE
(AMI) or WINFLASH.EXE(Award) from the following directory:
\UTILITY\AMIFLASH or AWDFLASH.

Summary of Contents for A33G Series


































Reviews:

No comments