PBU 08992B Operator'S Manual Download Page 1

This book has important information for the use and safe operation of this machine.  Failure to read this
book prior to operating or attempting any service or maintenance procedure to your  machine could result
in injury to you or to other personnel; damage to the machine or to other property could occur as well.
You must have training in the operation of this machine before using it.  If your operator(s) cannot read
this manual, have it explained fully before attempting to operate this machine.

All directions given in this book are as seen from the operator’s position at the rear of the machine.

 English (2 - 17)

 Español (18 - 33)

 Français (34 - 49)

READ THIS BOOK

LEA ESTE MANUAL

LISEZ CE MANUEL

ES

EN

FR

Form No. 71504A

7/08

 revised 1/10

 

                          

                                                         Printed in the U.S.A.

Propane Floor Burnisher

with Dust Control

U.S. Patent No. 7,162,771

Operator's Manual

Manuel d'utilisation

Libro de Instrucciones

PBU Models:

08992B (2117BCATCL), 08993B (2717BCATCL)

Summary of Contents for 08992B









































































Reviews: