6 of 6
www.pbteen.com
5. Locate a wall stud behind your furniture. Position a Bracket (E) on the stud approximately 1” below the top
of the furniture. Mark and drill pilot hole into the center of the stud with a 3/32” drill bit. Attach a Bracket (E)
to the stud with the Long Screws (F) provided.
6. On the back of the furniture, the second Bracket (E) will need to be attached to the furniture frame at the
top
.
To do this, temporarily move the furniture into its final position and mark the location of the wall’s
Bracket (E) on the furniture frame with a pencil.
7. Move the furniture away from the wall and place a Bracket (E) on the mark. Using the marks from the
previous step as a guide, drill holes for screws with a 3/32” drill bit. Attach the bracket to the furniture with
the Short Screws (G) provided.
8. Move the furniture into its final position, taking care to line up the wall bracket with the furniture bracket.
Thread the Nylon Strap (H) through the Bracket as shown in the illustration. Tighten strap until snug. Do not
overtighten.
Care Instructions:
•
Avoid direct sunlight and excessive temperatures.
•
Dust often using a clean, soft, dry and lint-free cloth.
•
Slightly moisten cloth with water. A damp cloth holds dust and prevents scratching.
•
Waxing is not recommended on lacquered finish.
