AMP 8200
Configuration and Installation
Copyright © 2022 PayFacto Inc.
Page 8 of 18
After you remove the terminal and accessories from the box, you need to install the battery and
charge it before you can use the terminal. The battery is shipped in the terminal but is not
connected to prevent the possibility of a short circuit during transport.
To install the battery and charge the terminal:
Turn the terminal over.
1.
On the back of the terminal press the tab to unlock the cover and lift the cover
from the terminal.
2.
You should notice a tag on the battery to assist in removal.
3.
If necessary, lift the battery from the terminal to have better access to the
connection port.
4.
Insert and seat the battery connector in the port, ensuring that the red wires are
on the left side and the black wires are on the right.
NOTE: The battery connector can only fit into the
port one way and should not require much force to
insert.
5.
Re-install the battery, making sure that the tag and label are facing upwards.
6.
