PAXXO 540WS, Original Instructions Manual, Page: 17 / 60

17
Paxxo AB, Bjurögatan 35, 211 24 Malmö, Sweden • Tel: +46 (0) 40 18 60 25 • www.paxxo.com
15. Replacing the plug-in unit
Removing the plug-in unit
• Turn off the switch on the front panel.
•
Pull out the air hose that leads to the foot pedal from the front panel
(see picture).
•
Disconnect the cable at the back.
• Unscrew the two knobs on the upper edge of the back.
•
Carefully remove the plug-in unit from the frame, like a drawer.
1.
Clean the plug-in unit according to the instructions above
before returning it.
2. Turn the unit (upside down) and clean the rectangular area
where all waste passes.
Fitting a new plug-in unit
• Fit the supplied replacement plug-in unit into position.
•
Screw the two black knobs at the back securely into place.
•
Connect the cable at the back.
• Push the hose for the foot pedal into place on the front panel.
•
Switch the unit on.
Returning a unit
Put the used and replaced plug-in unit in the box.
Instructions for replacing and cleaning the unit are included
in the box.
Fill in the attached status report and specify the error.
Return the box immediately to the distributor/Paxxo.
16. Disposal
The power adaptor/battery charger and plug-in unit for the Pactosafe can be sent back to the
manufacturer for recycling. Recycle the stand and chassis as metal. When replacing the battery,
the battery should be taken to a battery disposal/recycling station.
Knobs