Page 8
Operation - Do not disturb mode
Visitors can be stopped from calling the monitor
by putting it into 'Do not disturb' mode.
If the screen is blank, touch the screen to display
the menu.
Touch the 'Do not disturb' option. The button will
illuminate red.
Touch the button again to
exit this mode.
186 mm
170 mm
45 mm
12.95W
1000
0 °C
45 °C
Specifications
Power over Ethernet (PoE) power rating
Monitors per system
Operating temperature
Electrical
Environment
Dimensions
Max
Width
Height
Depth
Features
Indoor use only
Low
Vandal resistance
IP Rating
Min
Min
Min
Min
Max
Max
Max
Ethernet bandwidth requirement
Communication
Two way
100kb/s multicast
1Mb/s multicast
IEEE 802.3af class 0
Screen size
per call in progress
Screen resolution
Handset audio
Hands free audio
Screen illumination
Two way
LED backlight
4.3 inch colour TFT
480x272 pixels
Monitors should be cleaned using a clean damp cloth. Chemical cleaning products must not be used.
Alarm display
Alarm messages will display to the user at the
monitor if the option has been set in the local
Installer screen.
The user may view the camera to investigate the
alarm.
Note: Door left open alarms will only be available if
Net2 Entry is connected to a Net2 system. The Net2
system must be running v4.25 software or later.
