Paxar Gold 6037EX Programmer'S Manual Download Page 27

Page: 27 / 230

Printer Features 2-13

To choose the boot options:

Turn on the printer while pressing

until messages

appear. You must do this step. Otherwise, the date and

time prompts (the default) wait for input without appearing

on the screen.

When “Starting ROM-DOS…” appears, the printer beeps.

You have approximately two seconds to do one of the

following:

♦

Press

then

to bypass both files. The boot

process continues with default configurations. The

printer also prompts you for the date and time.

♦

Press

then

to request a prompt at each line of

both files. Enter Y to process the line or N to bypass it.

♦

Do nothing and let the printer process every line of both

files.

Booting from a PC

To boot the printer from the PC:

Gather the following files on a floppy disk:

♦

COMMAND.COM

♦

REMDISK.EXE

♦

LCD.COM

♦

AUTOEXEC.BAT (at a minimum, this file must contain

one line containing

LCD Y C

, which enables the display).

Enter REMSERV A: at the PC’s DOS prompt, where X is

the drive where the boot files reside.

Turn on the printer and from the Startup Menu, choose #3.

The printer boots from the PC.

Summary of Contents for Gold 6037EX






































































































































































































































Search results

Summary of Contents for Gold 6037EX

Reviews:

Related manuals for Gold 6037EX

Brands by name

Popular brands

Paxar Gold 6037EX, Programmer'S Manual

Search results

Summary of Contents for Gold 6037EX

Reviews:

Related manuals for Gold 6037EX

Brands by name

Popular brands