1) Place A920Pro host (by pushing from bottom to top) on the
base. When A920Pro host contacts with the base steadily, it
will be charged through the base.
®
2) Open the
Bluetooth
function of A920Pro host,
®
search the Bluetooth
device whose name is the
10 bit serial number of base's SN, then connect it.
3) After successful connection, A920Pro host can communicate
®
with the devices that connect with the base via Bluetooth
.
Low Energy
Low Energy
Low Energy
Specifications
5
Power
supply
：
DC
-
5V
@
2A
Ethernet
：
10
/
100Mbps
adaptive
network
port
RS-232
serial
port
：
Maximum
transfer
rate
115200bps
USB port
：
USB2
.
0
HOST
USB
：
USB2
.
0
Device
®
Bluetooth
：
Support Bluetooth wireless technology 5.0
®
Wi-Fi
：
Support 802.11 ac/a/b/g/n
Reset Button
：
Restore factory settings
®
®
Status Light
：
Power, Wi-Fi , Bluetooth wireless technology,
Ethernet
Working Environment: Temperature:0°C~50°C(32°F ~122°F)
R.H.: 10%~93%( non-condense)
Storage Environment: Temperature:-20°C~70°C(-4°F ~158°F)
R.H.: 5%~95%( non-condense)
Terminal Installation and Usage Tips
6
1) Do not damage electric wire and power adapter. If electric
wire or power adapter is damaged, please do not use the
terminal any more.
2) Before power adapter is plugged into power socket, please
make sure that voltage which the power socket supplies is
appropriate working voltage for the terminal.
3) Do not expose the terminal in sunshine, or in humid, hot, or
dusty environment
4) Keep the terminal away from liquid material.
5) Do not plug any unknown material into any port of the
terminal, since it may create serious damage to the terminal.
6) If the terminal is defective, please contact professional POS
repair technicians.
7) Do not assemble the terminal in explosion hazardous area.
Note:
1) Please put the base on an open and ventilated desktop to use.
2) Please use the device away from the places with wireless
interference.
3) When the base is used as a hotspot, the default password is
the 10-bit serial number of the base
200312000000591
Port Instruction:
USB
x
1:
Power
port
RS-232 x 1: RJ45-8P8C
USB x 1: USB2.0 Device port
USB x 1: USB2.0 Host port, used for connecting the scanner
gun or keyboard.
Ethernet x 1: RJ45-8P8C
Trademark notice:
®
“The Bluetooth word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PAX Technology Limited is under license. Other trademarks
and trade names are those of their respective owners.”
PAX TECHNOLOGY INC.
This document is provided for informational
purposes only. All features and specifications are
subject to change without notice. PAX's name and
PAX's logo are registered trademarks of PAX
Technology Inc. All rights reserved.
PAX TECHNOLOGY INC.
Responsible Party:
PAX Technology Inc.
8880 Freedom Crossing Trail,
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk: 877-859-0099
www.pax.us
