PawPail.com
4
SECURING YOUR PAWPAIL
FINAL ASSEMBLY
Ensure the fasteners that you select are long enough to provide adequate fixation to your chosen mounting
surface.
PawPail
15275 Collier Blvd. #201-104
Naples, FL 34119
https://www.pawpail.com
Product Name: PawPail Mounting System
Part Number: PP1030
Align the mounting hardware attached to your PawPail with the
Mounting Bracket as shown and gently lower your PawPail onto
both the lower mounting hardware and through the upper mount-
ing hardware. It may be necessary to slightly depress the quick
release tab.
To remove, depress the quick release tab while lifting your Paw-
Pail to disengage the Mounting System.
The Locking Pin Holes on your PawPail Mounting System allow
for cable locks to be used to prevent tampering or theft. Simply
pass a cable lock through one or both sides of the locking pin
holes to secure your PawPail to the Mounting Bracket. We recom-
mend the Master Lock 14" Cable Gun Lock 99KADSPT
The 4 Screw Holes can accept screws up to 3/16" diameter. #8 deck screws are sufficient for most
applications.
The 2 Band/Strap Channels accept bands/straps up to 7/16" width. For most mounting applications,
an 8" band/strap diameter is sufficient.
