ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
STEP 1. Place the seat on its side, left side up and attach left arm using screws as shown. Higher end of seat base is the front of
the chair. (FIGURE 1)
STEP 2. Attach spreader bars with screws as shown. (FIGURE 2) Note: The shorter spreader is used at back of the chair.
STEP 3. Next, attach seat back and secure with screws at the top and bottom as shown (FIGURE 3)
PARTS
Durawood
Porch Rocker
SUGGESTED TOOLS
(NOT PROVIDED)
•
Rubber Mallet (Optional)
•
Drill (Square-Head Drill Bit
provided in HARDWARE PACK)
Congratulations on purchasing this Durawood Porch Rocker! You’re going to love the quality, durability and simple assembly
—
plus
the full Residential Lifetime Warranty. QUESTIONS ABOUT THIS PRODUCT? Call our customer service team, (800) 643-3522.
HARDWARE PACK
Before beginning assembly, make sure you have all parts.
Note that not all parts pictured are to scale.
16 -
3"
Flathead Screws
1 - Square-Head Drill Bit
Hardware pack weight:
4.37
oz
FIGURE 1
FIGURE 2
FIGURE 3
Left Arm
Right Arm
Seat
Rocker Arms
Seat Back
Decorative Top Spreader
Spr
eader Bar
Spr
eader Bar
