![background image](http://html.mh-extra.com/html/paw/solexmini-tw/solexmini-tw_installation-and-commissioning-instructions_764066009.webp)
3 Assembly and installation [specialist]
2016/05
996091425-mub-en – V04
9
1.
Remove the station from the packaging.
2.
Copy the mounting holes to the mounting surface.
You can find a corresponding drilling template on
the paper board under the station.
3.
Drill the holes and insert appropriate wall plugs into
the holes.
4.
Screw in the screws and let them stick about 3 cm
out of the wall.
5.
Remove the insulating front shell. Hang the module
onto the screws and tighten the screws.
WARNING
Personal injury due to polluted potable water!
Heating water contains harmful substances that must not be washed into the
domestic hot water circuit.
If the station has been used to charge a buffer tank, there is still heating water
in the valves and fittings and in the pump of the secondary circuit, even after
draining. The heating water can not be completely removed.
The station must not be connected to a domestic hot water circuit
any more.