5 Assembly and installation
22
996098460-mub-en – V02
2016/05
Connection scheme of the cascade
Please observe the separate instructions of the controller SC5.14!
1.
Connect the temperature sensors to the controller:
Collector sensor S1
Storage tank 1 bottom: S2
In the piping set of the cascade: S3 + S9
Only one FlowRotor is connected (bottom FlowRotor 2).
Note:
The temperature sensors which are mounted in the stations,
are not connected to the controller.
2.
Tighten all union nuts and thread connections.
The installation of the transfer station is now completed
and the station can be put into operation.