1 Mounting of the insulation [specialist]
8
993xx3x-inf-ml – V01
2017/08
4.
Unmixed / mixed HeatBloC:
Incline the insulation such that the
lower edge of the insulating shell
glides over the distribution manifold.
5.
Unmixed / mixed HeatBloC:
Carefully press the lower part of the
HeatBloC insulation into the insulating
back shell until it snaps into place.
6.
Mixed HeatBloC:
Mount the actuator on the adjusting knob
of the mixed HeatBloC. Make sure that
the position of the mixing valve and of
the actuator correspond to each other.
7.
Unmixed / mixed HeatBloC:
Push the insulating front and back shell
of the distribution manifold together until
it snaps into place.
