PAW HeatBloC K38 DN 25, Installation And Operation Instruction Manual

Page: 11 / 24

4 Assembly and installation [specialist]
2020/04 993x083x-mub-en – V04 11
4 Assembly and installation [specialist]
The HeatBloC
®
K38 can be mounted on a PAW modular distribution manifold or on a wall
bracket. The modular distribution manifold and the wall bracket are optional accessories and
are thus not included in the scope of delivery.
NOTICE
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected against
ultraviolet radiation in order to prevent material damage of the installation.
4.1 Installation and commissioning of the HeatBloC
®
The HeatBloC
®
can be installed
•
Option 1:
on a PAW modular distribution manifold.
In this case a non return valve DN 25: 34011, DN 32: 37011) must be inserted in the
mixing valve return (C-3) to prevent unwanted circulation.
Flow
Flow
Heat generator
Return
Return
Consumer circuit
C-3