PAW HeatBloC K38 DN 25, Installation And Operation Instruction Manual

Page: 9 / 24

3 Product description
2020/04 993x083x-mub-en – V04 9
3.4 Accessories: Actuator (optional)
The PAW actuator for weather-compensated control is available as an accessory.
For mixing valves with flow on the left, the scale must be turned by 180°.
for mixing valve with flow on the right for mixing valve with flow on the left
Assembly of the actuator for
mixing valve with flow on the right:
If the PAW actuator has been purchased
as an optional accessory, the mixing
valve contains a metal plate. To mount
the PAW actuator on the mixing valve,
proceed as follows:
1.
Turn the rotary knob of the mixing
valve into position 0 (fig. 4).
2. Set the actuator to manual mode
by turning the selector switch (fig. 3).
3. Turn the rotary knob of the actuator
to the left to the position shown on
the adjacent figure (fig. 3).
4. Mount the rotation lock / the stop bolt in
the left opening of the metal plate (fig.
4). The actuator is fixed on a stop bolt.
5. Put the PAW actuator on the rotary
knob of the mixing valve and mount
the actuator on the stop bolt. The
PAW actuator must be mounted in a
horizontal position as shown in fig. 5.
6. Set the actuator to automatic mode.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
blue
blue
blue
red
red
Selector
switch
Stop bolt