![background image](http://html1.mh-extra.com/html/paw/heatbloc-k32-dn-25/heatbloc-k32-dn-25_installation-and-operation-instructions-manual_764042013.webp)
4 Assembly and installation [specialist]
2015/03
9936052x-mub-en – V09
13
4
Assembly and installation [specialist]
The K32 HeatBloC must be either installed on a PAW modular distribution manifold or a set of
wall bracket and mounting plate. The modular distribution manifold, the wall bracket and the
mounting plate are not included in delivery.
NOTICE
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected against
ultraviolet radiation to prevent material damage to the installation.
4.1
Installation of the modular distribution manifold / wall bracket with mounting plate
Mount the modular distribution manifold or the wall bracket with mounting plate as described in
the separate instructions.
If possible, choose the largest distance to the wall.
In this way it is easier to mount the insulation of the
distribution manifold.