4 Assembly and installation [specialist]
2020/04
9932013x-mub-en – V12
9
4
Assembly and installation [specialist]
The HeatBloC
®
K31 must be either installed on a PAW modular distribution manifold or a set
of wall bracket and mounting plate. The modular distribution manifold, the wall bracket and
the mounting plate are not included in delivery.
NOTICE
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected against
ultraviolet radiation to prevent material damage to the installation.
4.1
Installation of the modular distribution manifold / wall bracket with mounting plate
Mount the modular distribution manifold or the wall bracket with mounting plate as described
in the separate instructions.
If possible, choose the largest distance to the wall.
It is thus easier to mount the insulation of the
distribution manifold.
