16
Setting Heating Temperature
• Blinking on the Operation Display is not an Error Code.
• The unit has the “Outdoor Reset (Energy Saving)” feature, but this feature is disabled (Factory Default).
• To enable, contact your installer or Pavilion Customer Center at 1-855-443-8468.
is lit on the Operation Display, the Outdoor Reset (Energy Saving) is enabled.
• Heating Temperature is changing automatically based on the Outdoor Temperature.
* Refer to page 22 for details.
The following Heating Temperature Setting can be changed when the “Outdoor Reset” is disabled.
The temperature setting below is example.
The temperature setting necessary depends on the usage, the length of piping and the time of year.
* Heating Temperature range depends on Installer Mode Setting.
Refer to the Installation Manual for details.
* The
indicator is lit.
* To return to the home screen, press the
button or let panel sit for
approximately 20 seconds.
1
Press the
button ON.
2
Press the
button once.
The current “Heating
Temperature Setting” and
“Heating Icon” will be blinking.
(e.g.: 10:15AM)
(e.g.: 180°F)
Operation
Screen Display
Description
General temperature range (Factory Default*)
°F
°C
100
• • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • •
38
180
Initial factory setting
82
1
2
2
Set the temperature using
the
buttons
.
Summary of Contents for GHQ-C3201WX-FF PB US
Page 41: ...41 Memo ...
Page 42: ...42 Memo ...
