9
-
All the temperatures measured by the sensors of the unit
-
The operating time of the unit.
I/O status
8.2.5
The “I/O status” tab shows summary of the status of all inputs and outputs on the TAC4 control board.
Configuration
8.2.6
The “Configuration” tab shows the factory configuration, i.e. the type of unit as well as the different
options included in it. It also shows the software version of the TAC4 circuit.
Control
8.3
The “Control” menu is used to control the unit of the selected address. This page depends on the
operating mode chosen.
Functionalities available:
-
Display of the airflow control mode
-
Possibility to select the ventilation control mode:
•
RC position; control via the RC connected.
•
Auto position: control according to time slots.
•
Manual position: control via the
buttons of this screen.
-
Display of alarms using the red or green diodes
-
Choice and display of the ventilation level (LED under the
buttons)
-
Display of the current real airflows to the right of the screen;
-
Direct control via the “Boost”, “Bypass”, “Heating” and “Cooling” buttons.
Setup
8.4
The “Setup” menu is used to configure the setting of the fan’s operating mode, the supply temperatures
and the pressure alarm.
This page varies depending on the operating mode chosen.
Summary of Contents for TAC4 DG + TCP
Page 2: ......
