8
SmartNode OpenScape Business Appliance Quick Start Guide
5.2 Default IP Addresses
Note
There is no password for the SmartNode Gateway/E-SBC login. Just
press enter to proceed.
5.3 OpenScape Business UCC Server Configuration
Once connected as shown in
figure 3
on page 7, log in to the OpenScape
Business UCC server to get it configured.
6.0 Starting Up
The basic settings are made using the
Initial Installation
wizard of the web-
based management (WBM).
Access the WBM, using your preferred web browser, by typing the following
URL: https://192.168.1.9
Note
If you are asked to accept the SSL certificate from OpenScape Business,
click accept to proceed with the configuration.
Table 1. OpenScape Business UCC server
Ethernet Port
IP address
Subnet Mask
LAN2
192.168.1.9
255.255.255.0
Table 2. SmartNode Gateway
Ethernet Port
IP address
Subnet Mask
ETH 0/0
DHCP client
DHCP client
ETH 0/1 (DHCP Server)
192.168.1.1
255.255.255.0
Table 3. Default Login
SLES Linux
Unify OSB-S
SmartNode Gateway/E-SBC
Username
root
administrator@system
administrator
Password
patton
administrator
