Patton SmartNode 5541 Series, User Manual

Page: 17 / 59

SmartNode devices overview 17
SmartNode 5541 & 4141 Series User Manual 1 • General information
2.
Pressing the Reset button will change the blink pattern. 10 seconds after the last Reset button press, an
action will be performed based on the selected pattern
Figure 3. SmartNode SN5541 Series front panels
Front panel LED definitions
Figure 3 shows SmartNode 4141 LEDs; the LED definitions are listed in table 4 on page 18 .
Table 3. Power LED blink patterns
Pattern Action
1 blink, pause Boot normally
2 blinks, pause Switch to backup image, then boot (Boot normally if the device only has a single image)
3 blinks, pause Erase all configuration and licenses, then boot