Patton SmartNode 2290 Series, Quick Start Manual, Page: 8 / 12

8 SmartNode 2290 Series Quick Start Guide
Connect with the serial interface
The Console port is wired as an EIA-561, RS-232 port. Use the included Model 16F-561 adapter and cable (see
figure 8
) between the SmartNode’s Console port and a PC or workstation’s RS-232 serial interface. Activate the
terminal emulation program on the PC or workstation that supports the serial interface (e.g. HyperTerm).
Figure 8. Connecting to the terminal
Terminal emulation program settings:
•
9600 baud
•
no parity
•
8 bit
•
1 stop bit
•
1 start bit
•
No flow control
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each SmartNode Series device
Link
100M
Activity
0/0
0/1
0/2
0/3
En
et
0
Po
rts
Power
Console
Leased-Line Extender Over IP
SmartNode 2294
Run
V
oIP
Link
Link
100M
Activity
En
et
1