10
SmartNode 10100 Series Quick Start Guide
–
Default password: root
9.0 Additional Information
Refer to the following manuals—available online at www.patton.com/manuals—for detailed information
about installing, configuring and operating the SN10100 models, along with warranty, trademark and compli-
ance information.
•
SmartNode 10100 Series User Manual —www.patton.com/manuals/SN10100.pdf
•
Smart Media System Software Configuration Guide —www.patton.com/manuals/SmartMedia-scg.pdf
A.0 Compliance Information
A.1 Compliance
EMC
•
FCC Part 15, Class A
•
EN55022, Class A
•
EN ETSI 300 386 V1.3.3
Low-Voltage Directive (Safety)
•
UL 60950-1/CSA C22.2 No. 60950-1
•
IEC/EN60950-1
A.2 Radio and TV Interference
This device generates and uses radio frequency energy, and if not installed and used properly—that is, in strict
accordance with the manufacturer’s instructions—may cause interference to radio and television reception. This
equipment has been tested and found to comply with the limits for a Class A computing device in accordance with
specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection from
such interference in a commercial installation. However, there is no guarantee that interference will not occur in
a particular installation. If the equipment does cause interference to radio or television reception, which can be
determined by disconnecting the unit, try to correct the interference by one or more of the following measures:
moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging
the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on dif-
ferent branches).
