P L E A S E R E A d A N d S AV E T H E S E
I M P O RTA N T S A F E T Y I N S T R U C T I O N S
F E AT U R E S - O P E R AT I O N S
2. Insert the left and right Leg Assembly into the Base
Tubing. Secure with Base Tubing Screws. NOTE: Each
Leg Assembly is labeled "L" and "R" to distinguish Left
from Right. (See Fig. 4)
3. On left and right side of the Fan Housing, place
Rubber Bushing over exposed screws so the recessed
side fits snugly into the recessed grooves on each side
of the fan. (See Fig.5)
4. Pick up the Fan Head by the handle and align the Fan
Head pivot bolts with the holes in the left and right
Leg Assembly. (See Fig. 6)
5. Secure the Leg and Base Assembly to the Fan Housing
with the flat washer and Tilt Control Knob by turning
in a clockwise direction. (See Fig. 7)
OPERATING INSTRUCTIONS
1. Set fan on a dry, level surface.
2. Plug cord into any standard 120 volt AC outlet. Please
make sure the speed control is in the OFF position.
3. The power is adjustable by turning the power switch to
the selected speed setting.
NOTE:
This fan is for FLOOR USE ONLY.
ASSEMBLY INSTRUCTIONS
Assembly Time Required: 5-10 minutes.
Tools Required: Phillips Head Screwdriver.
Carefully unpack contents from carton. Make sure to
check all packaging materials (polyfoam, corrugation,
etc.) to ensure all parts are accounted for.
Lay out the parts as shown in the drawing in Figure 1 and
Figure 2. Ensure that all parts are included. If any parts
are missing please check the box and packaging
materials as some items may still be enclosed in them. If
all materials are still not accounted for please contact our
Consumer Service Department (see Warranty section for
details) or visit us on the web at www.pattonproducts.com
to order more parts.
ASSEMBLY
Refer to diagrams below for visual aid.
1. Attach Rubber Feet to Base Tubing using the Rubber
Foot Screw. Make sure the Rubber Feet are secured.
(See Fig. 3)
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the instruction
manual.
3. To protect against electrical shock do not immerse
unit, plug or cord in water or spray with liquids and
plug the appliance directly into a 120V AC electrical
outlet.
4. Close supervision is necessary when any appliance is
used by or near children.
5. Unplug from outlet when not in use, when moving
fan from one location to another, before putting on
or taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or
flammable fumes.
8. To avoid fire hazard, NEVER place the cord under
rugs or any parts near an open flame, cooking or
other heating appliance.
9. Do not operate any appliance with a damaged cord
or plug after the appliance malfunctions, or has been
dropped/damaged in any manner. Discard fan or
return to an authorized service facility for
examination and/or repair.
10. Do not run cord under carpeting. Do not cover cord
with throw rugs, runner, or similar coverings. Do not
route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be
tripped over.
11. The use of attachments not recommended or sold by
the appliance manufacturer may cause hazards.
12. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or leave
exposed to high traffic areas.
13. Do not use outdoors.
14. To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
15. Always use on a dry, level surface.
16. Do not operate fan until fully assembled with all
parts properly in place.
17. This product is intended for household use ONLY and
not for commercial or industrial applications.
18.
WARNING:
To reduce the risk of electrical shock
and injury to persons, do not use in window.
19.
WARNING:
To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
20. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse
rating) and check the product. If the replacement
fuse blows, a short circuit may be present and the
product should be discarded or returned to an
authorized service facility for examination and/or
repair.
PLEASE REAd ANd SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
F E AT U R E S - O P E R AT I O N S
F E AT U R E S - O P E R AT I O N S
C L E A N I N G / M A I N T E N A N C E
Caution:
Use only with GFCI protected receptacle. If 3-prong plug outlet is
not available, contact a qualified electrician.
Fig. 1
Rubber
Bushing (2)
Flat Washer (2)
Housing
Tilt Control
Knob (2)
Leg Assembly (2)
Base Screw (2)
Base Tubing
Rubber Feet (2)
Foot Screw (2)
Fig. 2
(2) M4 x 12
PM Screw (for
base tubing
assembly)
(2) M4 x 12PWM
Screw (for rubber
feet assembly)
(2) Flat Washer
(2) Rubber Bushing
(2) Rubber feet
Rubber Bushing (2)
Fig. 5
Fig. 3
Base Tubing
Rubber Feet (2)
Foot Screw (2)
Leg Assembly (2)
Left
Base Tubing
Right
Base Screw (2)
Rubber Feet (2)
Fig. 4
AdJUSTMENT INSTRUCTIONS
Fan Head Tilt-Adjustment:
1. To change the tilting angle of the fan head, simply
loosen the Tilt-Adjustment Knobs.
2. Move the fan head to the desired angle and firmly
tighten the Tilt-Adjustment Knob to lock into place.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for
your fan. Please remember:
REPLACEABLE FUSE
If your (5 Amp, 125 Volt) replaceable fuse blows, please
order a new fuse at 1-800-333-1930. Follow the below
instructions to replace the fuse on the plug.
User Servicing Instructions
1. Unplug your fan. Grasp plug and remove from the
receptacle or other outlet device. Do not unplug by
pulling on cord.
2. Open fuse cover, located on the top of the plug, by
using your thumb or a
flathead screwdriver to
slide the cover down
towards the prongs.
Note:
Ensure that fuse
cover is completely
open before attempting
to remove fuse.
3. Remove fuse carefully by using a small screwdriver
to pry the fuse out of the compartment by the metal
ends of the fuse (see Fig. 8).
4. Place plug on a solid, flat surface. Insert new 5 Amp,
125 Volt fuse into fuse compartment and use a small
screwdriver to secure the metal ends of the fuse into
the compartment.
Caution:
Risk of fire. Replace fuse only with 5 Amp,
125 Volt fuse.
5. Slide fuse cover closed completely. If fuse cover is
difficult to close, make sure fuse is secured in place
completely by pressing down on metal ends of the
fuse.
6. Risk of fire. Do not replace attachment plug. Contains
a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
FAN CLEANING
• Always unplug the fan before cleaning or disassembling.
• Do not allow water to drip on or enter into fan
housing.
• Be sure to use a soft cloth moistened with a mild soap
solution.
• Do not use any of the following as a cleaner: gasoline,
thinner, or benzene.
Clean the fan blade, grill, housing and base with a soft,
damp cloth. To clean the fan blade, remove the eight
screws from the front grill. After cleaning the blade,
make sure you secure the front grill to the motor housing
by reinstalling the eight screws. Please use caution
around the motor housing area. Do not allow the motor
or other electrical components to be exposed to water.
FAN STORAGE
When storing your fan in the off season, it is important to
keep it in a safe dry location. It is important to protect
the fan head from dust. We strongly recommend using
the original box from purchase.
Fig. 7
Flat Washer (2)
Tilt Control
Knob (2)
Fig. 6
Fuse cover
Fig. 8
Metal ends
Fuse
PX405-U_11EM1.indd 2
7/15/11 4:45 PM
