background image

6

Model 3088A Series Quick Start Guide

A.0  Compliance Information

A.1  Compliance

EMC:

FCC Part 15, Class A

EN55022, Class A

EN55024

Safety:

UL 60950-1/CSA C22.2 N0. 60950-1

IEC/EN60950-1

AS/NZS 60950-1

1.2  Radio and TV Interference (FCC Part 15)

This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in 
strict accordance with the manufacturer's instructions—may cause interference to radio and television recep-
tion. This equipment has been tested and found to comply with the limits for a Class A computing device in accor-
dance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable 
protection from such interference in a commercial installation. However, there is no guarantee that interference 
will not occur in a particular installation. If the equipment causes interference to radio or television reception, 
which can be determined by disconnecting the cables, try to correct the interference by one or more of the fol-
lowing measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna, 
and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and 
receiver are on different branches).

A.3  EC Declaration of Conformity

(See section 

A.4 “EG-Konformitätserklärung”

 for German version.)

Product Description:

 OnSite 3088A Series

This equipment conforms to the requirements of Council Directive 1999/5/EC on the approximation of the laws 
of the member states relating to Radio and Telecommunication Terminal Equipment and the mutual recognition 
of their conformity.

The signed Declaration of Conformity can be downloaded from 

www.patton.com/certifications/.

The safety advice in the documentation accompanying the products shall be obeyed. 
The conformity to the above directive is indicated by the CE sign on the device.

Summary of Contents for OnSite 3088A









Reviews: