BODi rS BD004 Quick Start Guide
3
Electrostatic Discharge (ESD) can damage equipment and impair electrical
circuitry. It occurs when electronic printed circuit cards are improperly
handled and can result in complete or intermittent failures. Do the follow-
ing to prevent ESD:
• Always follow ESD prevention procedures when removing and replac-
ing cards.
• Wear an ESD-preventive wrist strap, ensuring that it makes good
skin contact. Connect the clip to an unpainted surface of the chassis
frame to safely channel unwanted ESD voltages to ground.
• To properly guard against ESD damage and shocks, the wrist strap
and cord must operate effectively. If no wrist strap is available,
ground yourself by touching the metal part of the chassis.
CAUTION
10
BODi rS BD004 Quick Start Guide
7.0 Configuring the BODi rS
Refer to the following manual (available online at
www.patton.com/manuals
) for detailed information
about installing, configuring, operating, and troubleshooting theBODi rS BD004:
•
BODi rS 007 and BD004 User Manual:
:
www.patton.com/manuals/BD007_BD004.pdf
A.0 Customer and Technical Support
Toll-Free VoIP support: call
with a VoIP SIP client
Online support: www
.patton.com
E-mail support:
—answered within 1 business day
Telephone support:
•
Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to
2200 UTC/GMT)
•
Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 9:00 am to 5:30 pm CET (08:00 to 16:30
UTC/GMT)
Fax:
+1 (301) 869-9293
(USA)
or +41 (0)31 985 25 26 (
Switzerland)
B.0 Compliance Information
B.1 Compliance
EMC
•
EN55022, Class B
•
EN55024
Low-Voltage Directive (Safety)
•
CSA C22.2 No. 60950-1
•
IEC/EN60950-1, 2nd edition
www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
