![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-5531/smartnode-5531_user-manual_4021525018.webp)
SmartNode 5531 Overview
18
SmartNode 5531 User Manual
1
• General Information
Reset
The reset button (see
on page 16) has three functions:
•
Restart the unit with the current startup configuration—Press (for less
than 1 second) and release the
Reset
button to restart the unit with
the current startup configuration.
•
Restart the unit with factory default configuration (
shipping-config
)—
Press the
Reset
button for at least 5 seconds but no longer than 15
seconds until all LEDs (see
on page 19) starts to blink, to
restart the unit with factory default configuration.
•
Restart the unit with factory default configuration (
shipping-config
and
factory delivered Wizard files) and remove Wizard files added by user
as well as user uploaded preference files — Press the
Reset
button for
15 or more seconds until all LEDs blink faster
WAN interface
VDSL-ADSL,
G.SHDSL (EFM-
ATM)
The VDSL-ADSL, G.SHDSL, RJ-45 Ethernet LEDs are located on either
side of the DSL port.
ACT
(when lit or blinking) shows activity, and
LINK
(when lit) shows that the DSL port is connected.
Note
On VDSL-ADSL models (/AVA and /AVB)
only, the
ACT
LED has no function.
Table 2. Rear panel ports (Continued)
Port
Description