4
SmartNode 4654 & 4658 ADSL2+ Quick Start Guide
3.2 Login
1.
To access the SmartNode, start the Telnet application on your PC. Type the default IP address into the
address field:
192.168.1.1
. Accessing your SmartNode via a Telnet session displays the login screen.
Type the factory default login:
administrator
and leave the password empty. Press the
Enter
key after the
password prompt.
login:
administrator
password:<Enter>
192.168.1.1>
2.
After you log in, your SmartNode will be running in operator execution mode (indicated by > character
in the command line prompt). To enter configuration mode, use the commands
enable
and
configure
.
192.168.1.1>
enable
192.168.1.1#
configure
192.168.1.1(cfg)#
3.3 Changing the WAN IP address
1.
To modify IP configuration settings, you must enter
context IP
mode. Enter the following command:
192.168.1.1(cfg)#
context ip router
192.168.1.1(ctx-ip)[router]#
2.
Now you can set your IP address and network mask for the interface
ETH 0/0(WAN)
. In this example a
network 172.16.1.0/24 is assumed. The IP address in example is set to
172.16.1.99
. (You should set it
to the IP address that the network provider has given you.)
Note
The examples in this guide use a private IP network with the network address
172.16.1.0/24
.
192.168.1.1(ctx-ip)[router]#
interface eth_dsl
192.168.1.1(if-ip)[eth_dsl]#
ipaddress 172.16.1.99 255.255.255.0
2002-10-29T00:09:40 : LOGINFO : Link down on interface eth0.
2002-10-29T00:09:40 : LOGINFO : Link up on interface eth0.
172.16.1.99(if-ip)[eth_dsl]#
3.
Copy this modified configuration to your new start-up configuration. This will store your changes in non-
volatile memory. On the next start-up the system will initialize itself using the modified configuration.
172.16.1.99 (if-ip)[eth_dsl]#
copy running-config startup-config
172.16.1.99 (if-ip)[eth_dsl]#
The SmartNode can now be connected to your network.
4.0 Connecting the SmartNode to the network
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
CAUTION
