![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-4400/smartnode-4400_quick-start-manual_4100057004.webp)
Introduction
4
SmartNode 4400 Quick Start Guide
Introduction
This Quick Start Guide leads you through the basic steps to set up a new SmartNode (see
figure 1
) and to
download a configuration. Please note that this guide does not replace the detailed Software Configuration
Guide and the Getting Started Guide on the CD-ROM and available online at
www.patton.com/voip
.
Figure 1. SmartNode 4400
SmartNodes can be used for a wide variety of IP and voice over IP applications. To support and ease the config-
uration of the SmartNodes, configuration templates for the most important applications are available online at
http://www.patton.com/voip/appnotes.shtml
.
Setting up a new SmartNode consists of the following steps:
1.
Connect a PC to the SmartNode, log in and configure your LAN IP address (see
page 5
for details)
2.
Connect the SmartNode to the LAN (see
page 7
)
3.
Download a configuration example, adapt it to your network, and load it onto the SmartNode (see
page 8
)