![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-2294/smartnode-2294_getting-started-manual_4085537026.webp)
Installing the SmartNode extender
26
Model 2292 & 2294 Series Getting Started Guide
3 • Hardware installation
Installing an interface cable on the extender’s voice ports
The SmartNode extender comes with at least two voice ports (see
figure 6
) located on the back of the extender.
The voice ports are connected to analog devices via cables (see
figure 7
) terminated with RJ-11 connectors (see
figure 9
and
table 5
on page 27 for pin-out information).
Figure 6. Rear view showing location of Ethernet connectors and voice ports (SmartNode 2294 shown)
Figure 7. Analog connection
, 1.25A
Reset
Ports
ETH 0/1
ETH 0/0
Ethernet connectors
Voice ports
, 1.25A
Reset
Ports
ETH 0/1
ETH 0/0
RJ-11, male
RJ-11, male
, 1.25A
Reset
Ports
ETH 0/1
ETH 0/0