12
About this guide
This guide describes OnSite VPN router hardware, installation, and configuration.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1
on page 17 provides information about router features, capabilities, operation, and applications
•
Chapter 2
on page 26 provides hardware installation procedures
•
Chapter 3
on page 38 provides quick-start procedures for configuring the OnSite VPN router
•
Chapter 4
on page 44 provides an overview of the serial port and describes the tasks involved in its configu-
ration through the OnSite router.
•
Chapter 5
on page 58 provides information on T1/E1 port configuration.
•
Chapter 6
on page 67 describes how to configure the VPN connections between two OnSite routers or
between an OnSite and a third-party device.
•
Chapter 7
on page 79 provides an overview of IP access control lists and describes the tasks involved in their
configuration through the OnSite router.
•
Chapter 8
on page 93 describes how to use and configure OnSite
quality of service
(QoS) features.
•
Chapter 9
on page 112 provides LED definitions
•
Chapter 10
on page 114 contains information on contacting Patton technical support for assistance
•
Appendix A
on page 117 contains compliance information
•
Appendix B
on page 120 contains specifications for the routers
•
Appendix C
on page 124 provides cable recommendations
•
Appendix D
on page 128 describes the router’s ports and pin-outs
•
Appendix E
on page 132 lists the factory configuration settings for the OnSite VPN router
•
Appendix F
on page 134 provides license information that describes acceptable usage of the software pro-
vided with the OnSite VPN router
For best results, read the contents of this guide
before
you install the router.
