4
OnSite 2603 & 2620 Quick Start Guide
Figure 2.
Connecting OnSite to the PC’s serial port
2.
Start a HyperTerminal session on the PC using the settings:
9600 bps, 8 data bits, 1 stop bit, no parity, no flow control
3.
Log in to the OnSite using the factory-default login and password:
Login:
superuser
Password: superuser
Login successful
2.2 Modifying the IP address
1.
Display current IP interface settings for the OnSite
Ethernet
LAN port.
fi
ip list interfaces <enter>
IP Interfaces:
ID | Name | IP Address | DHCP | Transport
---|------|----------------|----------|--------------
1 | ip1 | 192.168.200.10 | disabled | <eth1>
----------------------------------------------
------
2.
Modify the IP address for the LAN port according to your network requirements.
fi
ip set interface ip1 ipaddress 10.10.10.5 255.255.255.0
Note
The above IP address (
10.10.10.5/24)
is only an example. You must choose an IP address on the same
subnet as your PC
.
3.
Verify the new address is correct and save it in system boot memory.
fi
ip list interfaces <enter>
fi
system config save <enter>
fi
Now you can connect the OnSite to your local IP network and complete the remaining configuration from your
PC using a standard web browser.
Link
Frame
TD
RD
Link
100M
Tx
Rx
WA
N
Ethernet
Power
Console
ipLink Gateway
High Speed W
AN
Access Router
Model 2603
Connect to Console port
Serial port
PC with
terminal emulator
