Patton electronics OnSite 1052 Series, User Manual, Page: 10 / 20

10
Switch S1-8. Must be set to the Off position (Reserved).
Configuring DIP switch S2
Use the eight DIP switches in S2 to enable 19.2 kbps synchronous oper-
ation and set the loopback modes. The following table summarizes
default positions of DIP switches S2-1 through S2-8. Detailed descrip-
tions of each switch follow the table.
Switch S2-1: 19.2 kbps Synchronous Rate. Enable Switch S2-1 to
allow the Model 1052 to operate at the 19.2 kbps synchronous data rate.
Important
A pair of Model 1052s communicate synchronously
across the twisted pair line connection. Therefore,
you
must set these switches whether your application is
async or sync
. For Sync or Async applications, please
configure one Model 1052 for internal clock mode and the
other Model 1052 for receive recover clock mode.
S1-8 Setting
Off Reserved
Table 1: S2 Summary Table
Position Function Factory Default
S2-1 19.2 kbps Enable Off
S2-2 RESERVED Off
S2-3 Reserved Off
S2-4 Not Assigned Off
S2-5 Not Assigned Off
S2-6 Reserved Off
S2-7 Compatibility Mode Off
S2-8 Not Assigned Off
S2-1 Activation Description
Off Disabled Synchronous data rate is 32–128 kbps as
defined by switches S1-1 and S1-2
On Enabled Model 1052 operates at synchronous 19.2 kbps
data rate