background image

 

4

 

1.2  RADIO AND TV INTERFERENCE (FCC PART 15)

 

This equipment generates and uses radio frequency energy, and if not 
installed and used properly—that is, in strict accordance with the manu-
facturer's instructions—may cause interference to radio and television 
reception. This equipment has been tested and found to comply with the 
limits for a Class A computing device in accordance with the specifica-
tions in Subpart B of Part 15 of FCC rules, which are designed to provide 
reasonable protection from such interference in a commercial installa-
tion. However, there is no guarantee that interference will not occur in a 
particular installation. If the equipment causes interference to radio or 
television reception, which can be determined by disconnecting the 
cables, try to correct the interference by one or more of the following 
measures: moving the computing equipment away from the receiver, re-
orienting the receiving antenna, and/or plugging the receiving equipment 
into a different AC outlet (such that the computing equipment and 
receiver are on different branches).

 

1.3  CE DECLARATION OF CONFORMITY

 

We certify that the apparatus described above conforms to the require-
ments of Council Directive 2004/108/EC on the approximation of the 
laws of the member states relating to electromagnetic compatibility; and 
Council Directive 2006/95/EC on the approximation of the laws of the 
member states relating to electrical equipment designed for use within 
certain voltage limits.

The safety advice in the documentation accompanying this product shall 
be obeyed. The conformity to the above directive is indicated by the CE 
sign on the device.

 

1.4  AUTHORIZED EUROPEAN REPRESENTATIVE

 

D R M Green
European Compliance Services Limited.
Avalon House, Marcham Road
Abingdon,
Oxon  OX14 1UD, UK

Summary of Contents for CopperLink Ethernet Booster 2110













Reviews: