Patton electronics CopperLINK 2172, User Manual

Page: 14 / 24

14
4.2 CONFIGURING DIP SWITCH S2
DIP switch S2 is where you configure the CopperLINK line rate, symmet-
ric or asymmetric, Ethernet, and Ethernet Shutdown. Table 1 summa-
rizes default positions of DIP switches S2-1 through S2-8. Detailed
descriptions of each switch follow the table.
Switch S2-1: Symmetric/Asymmetric Operation
Use switch S2-1 to configure the unit for symmetric or asymmetric opera-
tion..
Switches S2-2 and S2-3: Data Rate
Use switches S2-1, S2-2 and S2-3 to configure the CopperLINK line
rates.
Note See Appendix D on page 21 for line rate distances.
Table 1: S2 Summary
Position Description
S2-1 Symmetric/Asymmetric
S2-2 Line Rate
S2-3 Line Rate
S2-4 Ethernet configuration
S2-5 Ethernet configuration
S2-6 Ethernet configuration
S2-7 Ethernet Shutdown
S2-8 Remote Configuration
Table 2: Ethernet Auto Sense Selection Chart
S2-1 Setting
ON Symmetric Operation
OFF Asymmetric Operation
Table 3: Symmetric CopperLINK Line Rates Selection Chart
S2-2 S2-3 Symmetric Line Rate
ON ON 50 Mbps
ON OFF 25 Mbps
OFF OFF 10 Mbps
OFF ON Reserved