Patton electronics Access Server Administrator'S Reference Manual Download Page 51

Page: 51 / 262

The Statistics section

Access Server Administrators’ Reference Guide

5 • Authentication

2. Select

Modify

to set up or change access server Authentication parameters.

The Statistics section

The Statistics section of the main

Authentication

screen lists running totals of statistics for RADIUS and Static

User logins gathered since the last access server reset.

Validated authentications (auAuthenticationsValidTotal)

The total number of validated authentications since the last access server reset.

Validated via primary server (auAuthenticationsValidPrimary)

The number of authentications validated by the primary RADIUS authentication server since the last access
server reset.

Validated via secondary server (auAuthenticationsValidSecondary)

The number of authentications validated by the secondary RADIUS authentication server since the last access
server reset.

Validated via static database (auAuthenticationsValidStatic)

The number of authentications validated by the Static User database since the last access server reset.

Denied authentications (auAuthenticationsDenied)

The total number of authentication attempts requested but denied since the last access server reset.

Primary server retries (auPrimaryServerRetrys)

The number of times the access server needed to make subsequent requests for a call to the primary RADIUS
authentication server.

Secondary server retries (auSecondaryServerRetrys)

The number of times the access server needed to make subsequent requests for a call to the secondary RADIUS
authentication server.

Accounting server retries (auAccountingServerRetrys)

The number of times the access server needed to make subsequent accounting requests for a call.

Primary server timeouts (auPrimaryServerTimeouts)

The total number of authentication timeouts by the primary RADIUS authentication server.

Secondary server timeouts (auSecondaryServerTimeouts)

The total number of authentication timeouts by the secondary RADIUS authentication server.

Accounting server timeouts (auAccountingServerTimeouts)

The total number of accounting timeouts by the primary RADIUS accounting server.

Maximum Response Time

The maximum time it has taken for authentication to be completed since the server rebooted.

Summary of Contents for Access Server







































































































































































































































































Search results

Summary of Contents for Access Server

Reviews:

Related manuals for Access Server

Brands by name

Popular brands

Patton electronics Access Server, Administrator'S Reference Manual

Search results

Summary of Contents for Access Server

Reviews:

Related manuals for Access Server

Brands by name

Popular brands