Patton electronics Access Server, Administrator'S Reference Manual

Page: 105 / 262

Dial Out User Statistics window 105
Access Server Administrators’ Reference Guide 8 • Dial Out
Compression (doModemCompression)
Assigns the data compression protocol to use with the modem. This setting is in effect only when V.42bis error
correction (see “Protocol (doModemProtocol)”) is active.
• Direct(0)—No compression will be used.
• requestV42bis(1)—Enable V.42bis compression. If this is selected, the modem will either negotiate for
V.42bis data compression or—if V.42bis compression is not available—will use no data compression.
• requireV42bis(2)—V.42bis data compression is mandatory, otherwise disconnect.
Restrict Modification (doModemRestrictMods)
Enabling this feature restricts the dialout user from modifying the modem settings. Normally, the dialout user
has the ability to alter modem operation through the use of AT commands.
• disable(0)—The user can alter modem operation through the use of AT commands
• enable(1)—The user is prevented from modifying the modem settings
Dial Out User Statistics window
This window shows statistics for individual dial out users. The hyperlink headings DSP Link, and WAN Link
shown below point to the DSP, Link and Fractional tables for a unique time slot defined on each of these links.
For specific details on the function of parameters defined under these sections, refer to each parameter under
the access server Configuration Menu
The Dial Out User Statistics window (see figure 31) is where you can view the following:
• Unique ID information (see “Unique ID” on page 106)
• Activity time for the current or most recent session (see “Session” on page 107)
• Phone information (see “Phone” on page 107)
• Data transfer statistics (see “Data” on page 107)
• Physical layer configuration information (see “Physical Layer” on page 108)