1.0 WARRANTY INFORMATION
Patton Electronics
warrants all Model 536S components to be free
from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole recourse
shall be repair or replacement as described above. Under no condition
shall
Patton Electronics
be liable for any damages incurred by the use
of this product. These damages include, but are not limited to, the
following: lost profits, lost savings and incidental or consequential
damages arising from the use of or inability to use this product.
Patton
Electronics
specifically disclaims all other warranties, expressed or
implied, and the installation or use of this product shall be deemed an
acceptance of these terms by the user.
1.1 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at:
(301) 975-1007
;
http://www.patton.com
; or,
.
Note:
Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1092. Technical Service hours:
8AM to 5PM EST, Monday
through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warranted
for One Year parts and labor. If any questions or problems arise during
installation or use of this product, please do not hesitate to contact
Patton Electronics Customer Service at (301) 975-1007.
1
APPENDIX A
536S SPECIFICATIONS
Protocol/Application:
IEEE 802.5 Token Ring, shielded or
unshielded twisted pair
Circuit:
Bipolar, Solid State, 4-wire bi-directional
protection on RJ-45 connectors
Maximum Signal Rate:
16 Mbps
RJ-45 Pins Protected:
3, 4, 5 & 6
Response Time:
Clamps to 7.5V in 0.5μ Sec
Capacitance:
18 pF
Surge Current:
400A (8x20 S.C. Waveform)
Energy Handling:
1.5 KW for 1 msec
Grounding:
External connection provides separate unit-
ground to chassis-ground contact
Size:
3.05” x 1.68” x 0.81” (7.74cm x 4.26cm x
2.06cm)
4
