Patton electronics 3092, Getting Started Manual

Page: 36 / 74

3 • Configuring the DACS for operation Model 3092 iDSL DACS Getting Started Guide
36 Using a Web browser to complete Model 3092 configuration
12. For the password, type
superuser
; the TOP LEVEL MANAGEMENT window then appears (see
figure 18).
Figure 18. VT-100 Top Level Management window
13. Type
k
for System, then press
<Enter>
.
14. Under System, type
1
for Details, then press
<Enter>
.
15. Enter
g
for LAN Address, then press
<Enter>
.
16. Type your LAN IP address followed by pressing
<Enter>
.
17. Press the left-arrow cursor key on your keyboard to return to the previous screen.
18. If you do not need to change the LAN Mask from the default of 255.255.255.0, go to step 21. Otherwise,
press
h
and type the new LAN Mask in the same manner as when entering a LAN IP address.
19. Press the left-arrow cursor key until the TOP LEVEL MANAGEMENT window displays.
20. Select
a
for Home, then press
<Enter>
.
21. Under the Current Status page, type
1
(store Config(1)) to save the changes you have just made to the
configuration.
This completes the initial configuration of the Model 3092. The next steps in configuration will be done
directly through Ethernet via your Web browser.
Using a Web browser to complete Model 3092 configuration
This section describes configuring the following:
• Displaying the DACS home page (see “Displaying the DACS 3092 Web Administration Pages” on
page 37)
• Setting static connections with DS0 mapping (see “Configuring the DS0 mapping” on page 39)