background image

3060/V24

102001UA

i

P

ATTON

 E

LECTRONICS

 C

O

.

I

NSTALLATION

 A

ND

 O

PERATIONS

 M

ANUAL

COPYRIGHT NOTICE

Copyright © 2000 Patton Electronics Co., All Rights Reserved.

PROPRIETARY NOTICE

The information contained herein is proprietary and confidential to Patton Electronics Co.  Any
reproduction or redistribution of this publication, in whole or in part, is expressly prohibited
unless written authorization is given by Patton Electronics Co.

WARRANTY NOTICE

WARRANTIES:  Patton Electronics Co. (hereafter referred to as Patton) warrants that its
equipment is free from any defects in materials and workmanship.  The warranty period shall
be two years from the date of shipment of equipment.  Patton’s sole obligation under its
warranty is limited to the repair or replacement of the defective equipment, provided it is
returned to Patton, transportation prepaid, within a reasonable period.  This warranty will not
extend to equipment subjected to accident, misuse, alterations or repair not made by Patton or
authorized by Patton in writing.

PUBLICATION NOTICE

This manual has been compiled and checked for accuracy.  The information in this manual
does not constitute a warranty of performance.  Patton reserves the right to revise this
publication and make changes from time to time in the content thereof.  Patton assumes no
liability for losses incurred as a result of out-of-date or incorrect information contained in this
manual.

Summary of Contents for 3060/V24























Reviews: