background image

 

2

 

1.0  WARRANTY INFORMATION

 

Thank you for your purchase of this Patton Electronics product. This 
product has been thoroughly inspected and tested and is warranted for 
One Year parts and labor. If any questions or problems arise during 
installation or use of this product, please do not hesitate to contact Pat-
ton Electronics Technical Services at (301) 975-1007.

 

1.1  WARRANTY STATEMENT

 

Patton Electronics

 

 warrants all Model 3042 components to be free from 

defects, and will—at our option—repair or replace the product should it 
fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and does 
not cover customer damage, abuse or unauthorized modification. This 
product contains no user serviceable parts; therefore the user shall not 
attempt to modify the unit in any way. If this product fails or does not per-
form as warranted, your sole recourse shall be repair or replacement as 
described above. Under no condition shall 

 

Patton Electronics

 

 be liable 

for any damages incurred by the use of this product. These damages 
include, but are not limited to, the following: lost profits, lost savings and 
incidental or consequential damages arising from the use of or inability to 
use this product. 

 

Patton Electronics

 

 specifically disclaims all other war-

ranties, expressed or implied, and the installation or use of this product 
shall be deemed an acceptance of these terms by the user. In the event 
the user detects intermittent or continuous product malfunction due to 
nearby high power transmitting radio frequency equipment, the user is 
strongly advised to use only data cables with an external outer shield 
bonded to a metal or metalized connector.

 

1.2  RADIO AND TV INTERFERENCE

 

The Model 3042 generates and uses radio frequency energy, and if not 
installed and used properly—that is, in strict accordance with the manu-
facturer's instructions—may cause interference to radio and television 
reception. The Model 3042 has been tested and found to comply with the 
limits for a Class A computing device in accordance with the specifica-
tions in Subpart J of Part 15 of FCC rules, which are designed to provide 
reasonable protection from such interference in a commercial installa-
tion. However, there is no guarantee that interference will not occur in a 
particular installation. If the Model 3042 does cause interference to radio 
or television reception, which can be determined by disconnecting the 
RS-232 interface, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures: moving the computing 
equipment away from the receiver, re-orienting the receiving antenna 
and/or plugging the receiving equipment into a different AC outlet (such 
that the computing equipment and receiver are on different branches).

Summary of Contents for 3042









Reviews: