3040/V35
139001UA
ii
P
ATTON
E
LECTRONICS
C
O
.
I
NSTALLATION
A
ND
O
PERATIONS
M
ANUAL
EMISSION REQUIREMENTS
RADIO AND TV INTERFERENCE
The Patton devices generate and use radio frequency energy, and if not installed and used
properly—that is, in strict accordance with the manufacturer’s instructions—may cause
interference to radio and television reception. The Patton devices have been tested and found
to comply with the limits for Class A computing devices in accordance with the specifications
in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection
from such interference in a commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the Patton devices do cause
interference to radio or television reception, which can be determined by disconnecting the
cables, the user is encouraged to try to correct the interference by one or more of the following
measures: moving the computing equipment away from the receiver, re-orienting the receiving
antenna, and/or plugging the receiving equipment into a different AC outlet (such that the
computing equipment and receiver are on different branches).
CANADIAN EMISSIONS
This digital apparatus does not exceed the Class A limits for noise emmissions from a digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le present appareil numerique n’emet pas de bruits redioelectriques depassant les limites
applicables aux appareils numeriques de la Class A prescites dans le Reglement sur le
brouillage redioelectrique edicte par le ministere des Communications du Canada.
