6
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This prod-
uct has been thoroughly inspected and tested and is warranted for One
Year parts and labor. If any questions arise during installation or use of the
unit, contact Patton Electronics Technical Services at (301) 975-1007.
2.1 FEATURES
• Terminates E1/G.703 circuits over a 4-wire RJ-48C interface
• Connects to standard CPE serial and 10Base-T interfaces
• Unstructured rate of 2.048 Mbps (G.703)
• Selectable AMI or HDB3 line coding
• Configuration via internal DIP switches or SNMP management of local
unit through the 1001MC
• Six easy-to-read LED indicators monitor data and diagnostics
• Internal, external, network clocking
• also operates as a high-speed point-to-point modem
• Fits into Patton’s 2U rack-mount chassis
• Made in USA
• Conforms to ONP requirement CTR12 for connection to international
telecom networks
2.2 GENERAL PRODUCT DESCRIPTION
The Model 2707RC Series
are single port E1 CSU/DSUs that provide
high-speed WAN connectivity in a rack card package. Connecting to the
serial WAN port of a switch, router or multiplexer, the NetLink-E1™ pro-
vides E1 access connection at data rates of 2.048 Mbps. The NetLink-
E1™ is an excellent choice when terminating leased line services, Frame
Relay backbones, internet access as well as LAN-to-LAN services.
The Netlink-E1™ provides digital access to local WAN services between
two facilities over a dedicated 4-Wire circuit. Clock modes, line imped-
ance, and coding options are programmed via internally accessible DIP
switches or SNMP manageable through the 1001MC. The Netlink-E1™
uses AMI and HDB3 line coding. Netlink-E1™ also supports a full range
of system and diagnostic features that make system setup easy.
The NetLink-E1 provides E1 terminations over a modular RJ-48C jack or
dual 75 Ohm BNC connectors when using the 1001RCM11575 (X.21)
rear card.
