APPENDIX D
INTERFACE SETTINGS & ORIENTATION
APPENDIX C
FACTORY REPLACEMENT PARTS
The Patton Model 222NRC rack system features interchangeable
rear half cards, power cords/fuses for international various operating
environments and other user-replaceable parts. Model numbers and
descriptions for these parts are listed below:
Patton Model #
Description
222NRPEM .........................120/240V Rear Power Entry Module
222NRPSM-1 ......................120/240V Front Power Supply Module
222NRPEM-DC...................DC Rear Power Entry Module
222NRPSM-48A..................48V Front Power Supply Module
0805US ...............................American Power Cord
0805EUR.............................European Power Cord CEE 7
0805EURP ..........................Europlug Power Cord CEE 7/16
0805UK ...............................United Kingdom Power Cord
0805AUS.............................Australia/New Zealand Power Cord
0805DEN.............................Denmark Power Cord
0805FR ...............................France/Belgium Power Cord
0805IN.................................India Power Cord
0805IS.................................Israel Power Cord
0805JAP..............................Japan Power Cord
0805SW ..............................Switzerland Power Cord
0516FPB1 ...........................Single Width Blank Front Panel
0516FPB4 ...........................4-Wide Blank Front Panel
0516RPB1...........................Single Width Blank Rear Panel
0516RPB4...........................4-Wide Blank Rear Panel
056S1..................................Set of 16 #4 pan head screws/washers
15
PATTON MODULAR INTERFACE - 10 Wire RJ-45
Contact Number
Circuit
Description
1
N/A
Not Used
2
125
DSR
3
109
Received Line Signal Indicator (CD)
4
108 / 2
DTE Ready (DTR)
5
102
Signal Common
6
104
Received Data
7
103
Transmitted Data
8
106
Clear to Send
9
105 / 133
Request to Send / Ready for Receiving
10
N/A
Not Used
Pins 2-9 conform to the EIA/TIA-561 eight position non-synchronous interface standard.
For all modular jacks
(6, 8 or 10 position):
Pin 1 is always toward
the bottom when the
rear card is oriented
correctly in the slot
16
