L.)
Line up the PC board with the two slots located on the rear panel
bottom left and bottom right. Gently slide the PC board/rear panel
assembly back into the enclosure. It is properly installed when the
all of the indicators and switches are aligned at the front panel and
the rear panel bezel is fully mated into the enclosure. DO NOT
FORCE THE UNIT INTO THE ENCLOSURE. THIS USUALLY
INDICATES THAT THE PC BOARD WAS NOT INSERTED INTO
THE TWO SLOTS PROPERLY.
M.) Reinstall the two metal screws that were removed as instructed in
Step E, above.
N.) Reinstall the power cord according to the Operator's Manual
instructions.
5
3.0 REPLACEMENT FUSES
The following replacement fuses are available directly from Patton
Electronics. You may also use the reference part numbers to order
directly from the manufacturer.
Patton Part Number
Part Description
Patton Models 1090, 1092, 1093, 1185, 2500, 2510, 2520, 2703
and 2703-X21 (120/230V switch-selectable
units)
08242........................ Fuse 5x20mm, 100mA, 250V, Time-lag
Littelfuse P/N 218.100
Patton Models 1090-DC, 1090-UI, 1092-DC, 1093-DC, 1095-DC,
1095-UI, 1185-DC, 2703-DC, 2703-UI,
2703-UI, 2703-X21-DC and 2703-X21-UI:
0821R2....................... Fuse 5x20mm, 200mA, 250V, Time-lag
Littlelfuse P/N 239.200
6
