T
TA
AB
BL
LE
E O
OF
F C
CO
ON
NT
TE
EN
NT
TS
S
Section
Page
1.0 Warranty Information .............................................................2
1.1 Radio and TV Interference
1.2. CE Notice
1.3 Service
2.0 General Information...............................................................4
2.1 Features
2.2 Description
3.0 Configuration .........................................................................5
3.1 Configuring the Hardware DIP Switches
3.1.1 Configuration DIP Switch Set ÒS1Ó
3.1.2 Configuration DIP Switch Set ÒS2Ó
3.2 NetLink Plug ÔnÕ Play
4.0 Installation ...........................................................................13
4.1 Connect G.703 Network
4.2 Jumper Configuration
4.2.1 Connect Twisted Pair (120 ohm) to G.703 Network
4.2.2 Connect Dual Coaxial Cable (75 ohm) to G.703 Network
4.3 Connect Twisted Pair DSL Interface
4.4 Power Connection
5.0 Operation .............................................................................18
5.1 Power-Up
5.2 LED Status Monitors
5.3 Test Modes
5.3.1 Overview
5.3.2 Loops and Patterns
5.3.3 Using the V.52 (BER) Test Pattern Generator
Appendix A - Specifications ........................................................29
Appendix B - Factory Replacement Parts and Accessories.......30
Appendix C - Transmission Distance Chart................................31
Appendix D - Led Descriptions....................................................32
1
1
1..0
0 W
WA
AR
RR
RA
AN
NT
TY
Y IIN
NF
FO
OR
RM
MA
AT
TIIO
ON
N
Patton Electronics
warrants all Model 1088 components to be
free from defects, and willÑat our optionÑrepair or replace the prod-
uct should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials,
and does not cover customer damage, abuse or unauthorized modifi-
cation. If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall
Patton Electronics
be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or consequen-
tial damages arising from the use of or inability to use this product.
Patton Electronics
specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall
be deemed an acceptance of these terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 1088 generates and uses radio frequency energy, and
if not installed and used properlyÑthat is, in strict accordance with the
manufacturer's instructionsÑmay cause interference to radio and tele-
vision reception. The Model 1088 has been tested and found to com-
ply with the limits for a Class A computing device in accordance with
the specifications in Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection from such interference in a
commercial installation. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If the Model 1088 does
cause interference to radio or television reception, which can be deter-
mined by disconnecting the unit, the user is encouraged to try to cor-
rect the interference by one or more of the following measures: mov-
ing the computing equipment away from the receiver, re-orienting the
receiving antenna and/or plugging the receiving equipment into a dif-
ferent AC outlet (such that the computing equipment and receiver are
on different branches).
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the European Union
(EU). A Certificate of Compliance is available by contacting Technical
Support.
2
