background image

A

APPPPEEN

ND

DIIX

 

A

A

SPECIFICATIONS

Transmission Format:  Asynchronous

Data Rate:  

300 to 19,200 bps

Data Protection:  

High speed surge protection and 
transformer isolation (Model 1017S only)

Distance:

See table below

Surge Protection:  

600W power dissipation at 1 mS and 
response time of 1.0 pS (Model 1017S only)

Control Signal:

The single Mac control line, Handshake In, 
turns on when the modem is connected

Transmit Line:  

4-wire, unconditioned line (2 twisted pairs)

Transmit Mode:  

Full duplex

Transmit Level:  

0 dBm 

Line Connection:  

RJ-11, RJ-45

Power Supply:  

No external power required, uses ultra low 
power from data and control signals

Size:

2.0” x 1.7” x 0.8”

Mini Din 8 to RJ-45 Cable

Din 8

RJ-45

Signal

1 ---------------3 --------------HSKo (Handshake Out)
2 ---------------2 --------------HSKi (Handshake In)
3 ---------------6 --------------TD- (Transmit Data-)
4 ---------------4 --------------Gnd (Ground)
5 ---------------5 --------------RD- (Receive Data-)
6 ---------------4 --------------TD+

(Transmit Data)

7 -------------N/C-------------GPi 
8 -------------N/C-------------RD+ (Receive Data)

TD+ is connected to ground

3.3  OPERATING THE MODEL 1017

Once the Model 1017 is properly installed, it should operate trans-

parently—as if it were a standard cable connection.  Operating power
is derived from the Mac's data and control signals; there is no
“ON/OFF” switch.

6

5

19

24

26

19,200

2.5

1.8

1.2

9,600

5.5

3.7

2.5

4,800

7.5

5.0

3.0

2,400

8.5

5.6

3.7

1,200

9.0

6.2

4.3

Distance Table (miles)

Data Rate

Wire Gauge

Summary of Contents for 1017






Reviews: