Pattfield PE-900HO, Original Instructions Manual

Page: 88 / 92

EN 86
Product overview
1 On / Off switch
2 Depth adjustment knob
3 Planing depth scale
4 Parallel guide
5 Lock off button
6 Power cord
7
Tool storage
8 Dust extraction port
9 Blade cover
10 Rebating depth guide
DUST COLLECTION
Attach the dust bag to the dust extrac-
tion port 8 .
1 Alternatively you can directly attach a
suitable vacuum cleaner.
2
Never use the tool without a dust
collection system.
Intended Use
The tool is intended for planing and rebating
wooden materials, such as beams and boards.
It is also suitable for beveling edges. The tool
is not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Make sure the dust bag is empty
and not clogged.
Using the tool
1. To switch on the tool, press and hold the
lock off button 5 . Then press and hold the
on / off switch 1 .
2. Make sure your workpiece can not slip.
Start working, while holding the tool
firmly with both hands. Move the running
tool to the workpiece and push it forward
slowly while applying pressure on the
centre of the base plate.
3. To switch off the tool, release the on / off
switch 1 .
Warning! Apply the machine to the
workpiece only when switched on.
Otherwise there is danger of kickback
when the cutting tool jams in the work-
piece.
Planing
When planing hard materials (e.g. hardwood)
and utilizing wide planer width, set low plan-
ing depth and reduce feed. Excessive feed re-
duces the surface quality and can lead to rapid
clogging of the dust extraction port 8 .
To achieve high grade surfaces, work with
sharp blades, low feed and low planing depth.