74
GB
GB
Storage environment -25~+55 °C
Rated current 2 A
Motor speed 4600 rpm
Scope of delivery
Art No. 8876494
Manual
Accessories
KNOW YOUR AIR Compressor
See figure 1.
The safe use of this product requires an understanding
of the information on the product and in this operating
manual as well as a knowledge of the project you are
attempting. Before using this product, familiarize
yourself with all operating features and safety
requirements.
Carrying handle
The air compressor has a carrying handle for easy
transport.
Cord wrap
The cord wrap keeps the cord neatly out of the way for
storage.
Oil-free pump
The oil-free pump reduces the need for maintenance.
Pressure regulator knob
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose.
Quick coupler
The air compressor has a quick connect coupler
located on the side of the unit.
Regulatory pressure gauge
The current line pressure is displayed on the regulatory
pressure gauge. This pressure can be adjusted by
rotating the pressure regulator knob.
Safety valve
The safety valve is designed to automatically release air
if the air tank pressure exceeds the preset maximum.
Tank pressure gauge
The tank pressure gauge indicates the pressure of the
air in the tank.
of least resistance for electric current to reduce the risk
of electric shock. This tool is equipped with an electric
cord having an equipment-grounding conductor and
a grounding plug. The plug must be plugged into a
matching outlet that is properly installed and grounded
in accordance with all local codes and ordinances. Do
not modify the plug provided. If it will not fit the outlet,
have the proper outlet installed by a qualified electrician.
WARNING
Improper installation of the grounding plug could result in a
risk of electric shock. The wire with green-colored insulation
(with or without yellow stripes) is the grounding wire.
Check with a qualified electrician or service personnel if
the grounding instructions are not completely understood
or if in doubt as to whether the product is properly
grounded. Repair or replace a damaged or worn cord
immediately. Only connect the product to an outlet
having the same configuration as the plug. Do not use
an adapter with this product.
Residual current device (RCD) protection should be
provided on the circuit(s) or outlet(s) to be used for the
air compressor. Outlets are available having built-in
RCD protection and may be used for this measure of
safety.
If the air compressor is used with an extension cord,
ensure the connection of the power cord of the tool
and the extension cord are not on the ground. Auxiliary
devices should always be plugged into the wall outlet
and not at the connection of an extension cord and the
power cord of the tool.
If a protected outlet is not available, do not use the
air compressor until an outlet can be changed or auxiliary
protection can be obtained. These auxiliary protection
devices are available at your local retailer.
SPECIFICATIONS
Air tank capacity 6 L
Air flow 40L/min
Air pressure 6.8 bar max
Input 230 V
50 Hz
Tank pressure gauge 40 mm diameter
Regulatory pressure 40 mm diameter
gauge
Weight 6.8 kg
Working environment +5~40 °C
Sound power level LwA 96 dB
Humidity < 50 %
Altitude ≤ 1000 m